For our Canofer we exclusively applied the best components of well-known German and Suisse manufacturers like Mundorf, ELMA and WBT.

 The connectors Nextgen® by WBT take care of a perfect integration to your phono equipment. Mundorf tin-foil-condensers create vital signals without loss of sound.

The board’s concrete dual-mono-structure and the perfectly attuned hand-selected transistors and components are adjusted to your MM- or MC-system with absolute precision by noise-free ELMA-switches. A special suspension-mechanism completely decouples board and enclosure. The board is totally shed and extra shielded to eliminate all sonic and electromagnetic faults.

For MM-systems there are 300, for MC-systems 1836 possible settings – you surely will find the right one for your system.

Turn-switches at the enclosure’s front allow an extremely comfortable setting!

Der Canofer S

• length: 437 mm

• height: 105 mm

• width: 267 mm

• Enclosure: anodized aluminium

• Input sensiivity:(200mV output): MM-40dB / MC -60dB 2,0mV / 0,2mV / 1kHz

• Input impedance (MM):50 k / 90 pF

• Max. input voltage: 110 mV (bei 1 kHz)

• Distortion factors (200 mV output): 100 Hz > 0,001%, 1kHz > 0,001%, 20 kHz > 0,001%

• Distortion factor with overdriving (+32 dB; 8,4 V output): 100 Hz > 0,016% 1 kHz > 0,010% 20 kHz > 0,010%

• Observance of RIAA-characteristic: > +/- 0,15 dB

• Frequency response: 0 Hz - 40 kHz +/-0,15 dB

• Signal-to-noise-ratio: 88 dB relating 0,775 Volt V= 100 

• Operating voltage: 15V DC

• Current consumption: 25 mA

• External power supply unit

Dial knob:

Gain / Verstärkung (in Ω bzw. kΩ): 18 – 22 – 27 – 33 – 39 – 47 – 56 – 68 – 82 – 100 – 120 – 150 – 180 – 220 – 270 – 330 – 390 – 470 – 560 – 680 – 820 sowie 1 - 1,2 - 1,5 kΩ

Resistance / Widerstand (in Ω bzw. kΩ): 22 – 33 – 47 – 75 – 130 – 220 – 330 – 470 – 680 – 820 - 1.0 - 1,2 - 1,5 - 2,2 - 3,0 - 4,7 - 6,8 – 10 – 15 – 22 – 47 – 75