The MCap® Supreme Silver/Gold/Oil is the top-of-the line model of the Mundorf oil impregnated capacitors. In comparison with the Silver/Oil version, it technically features a further extended lifetime. More importantly, sonically the Silver/Gold/Oil version stands out due to its wonderful natural singing and exceptional micro dynamic, at the same time. Capacitance: 0.010μF-10μF; Dielectric: Polyprophylene; Metallisation: 99.99% silver, 1% gold; Purity of silver: min. 99.97% typ. 99.99%; Purity of gold: min. 99.97% typ. 99.99%; Dielectric strengh: 1200V DC; Loss factor tan ∂: 0.0002@1 kHz, 0.0001@10 kHz.

M-CAP® Supreme Silver and Gold capacitors are the latest new additions to the range of Mundorf components. According to Mundorf the crystalline structure of the 99.99% Silver with an admixture of 1% Pure Gold is improved on which gives this capacitor more precision combined with a sense of harmony and elegance.

This product is an oil impregnated metallized paper dielectric capacitor, with the same series wiring as the M-CAP® Supreme capacitors. As the name indicates, high-purity silver is used for the capacitor coating, and the winding is impregnated with a special oil developed in an exhaustive series of experiments and listening tests. Both these features contribute to an even fuller and smoother tonal richness and diversity.

The M-CAP® SUPREME has been internationally acclaimed as the ultimate high-end capacitor. Its outstanding sound performance is achieved with a unique combination of advanced technologies No matter where you use the M-CAP® SUPREME – as a coupling capacitor in your CD player or amplifier, or in the crossover of your speakers – you always get the same surprising and impressive performance.

The M-CAP® is an audiophile metallized polypropylene capacitor. In selection of the materials used, special attention was given to the sound properties. Great care taken during the production guarantees constant high quality and minimum electrical and mechanical tolerances. The practically induction-free type of construction and the low loss factor of the M-CAP® results in a very "quick" capacitor. The M-CAP forms the basis for vivid music reproduction, rich in nuance.

Mundorf's MKT Capacitors are metallized polyesther film capacitors that have a loss factor approximately 20 times that of an M-CAP, but less than a tenth of the loss factor of a bipolar electrolytic capacitor. The MKT capacitors are an ideal choice when used for mid-range designed frequency cross-overs.

The M-Cap ZN is a tinfoil capacitor of the highest class. Solid tinfoil, together with high grade polypropylene as dielectric, are used in its manufacture. This massive tin layer improves the sound properties in unexpected ways: Because of the great weight of the tinfoil and the resulting mass inertia, oscillation of the foil and the accompanying microphonic effect are effectively prevented. This capacitor is incredibly quick, lively and expect an increase in transparency and spatial quality.

The Mtubecap is made of polyprophylene. It combines a high degree of dielectric strength and low residual inductivity with a very compact form of construction. It has been developed as a high-quality technical alternative to high-voltage electrolytic capacitors. The advantages over electrolytic capacitors are: Lower ESR, Longer Service Life, and Self-healing properties. The TubeCap contributes to a finer, livelier and higher definition sound impression.

The M-Lytic HV electrolytic capacitors have been developed from the latest materials and under utilization of the most modern manufacturing technique especially for the requirements of tube amps. The 450 VDC versions have an axial construction form, whereas the 500 VDC types are offered in snap-in housings. Following many classic designs, these capacitors are offered as double capacity.

Mundorf MLytic HC are true high end electrolytic capacitors. A patented method for internal contacting enables the realization of a very low ESR and the most marginal residual inductivity. Since these capacitors have been designed for permanent currents of up to several hundred amperes. They are well-prepared for installation on a dissipater. Due to these attributes these capacitors can supply extreme peak currents. They do this very quickly and thus form the basis for a dynamic, precise bass as well as a lively and clear middle/high tone range. Even with extreme bass impulses the playback remains stable and clean, without any compression effects whatsoever.

Mundorf newest generation capacitors, MCap RXF (Radial Xtra Flat). Utilize optimal winding geometry. Polypropylene sealed foil capacitor, alu metallized with a massive connector plate. Extremely short, low-loss signal transmission is achieved with a reduced residual-resistance (ESR) and low residual-inductivity (ESL).

The M-Lytic Audio Grade product series are maded especially conceived for applications within the pre-amplifiers or small power amplifiers. The assemblage always refers to snap-in models for assembly boards. Throughout its development, importance was placed upon attaining low ESR and ESL values, as well as a low inner-sound development. Storage facilities are currently being constructed.